brushless motor setup

[mickcav]

I have a tto1-e ,i have standard motor set up but want to go to a brushless setup.What would be a good choice of brand.Do i need a big dollar type or a cheaper type.Should i buy as a kit.

[akuntze]

As the saying goes "you get what you pay for". I will say that the TT-01E is not meant for high powered brushless motors. What are you looking to get? I would say a 21.5 brushless is as fast as you should go unless you get a new chassis. You won't be able to gear it right and will risk blowing up the motor or esc.

[Haddi Taha]

Many people use EZRUNS in there tt01's, i use a 9t one, the 5.5t is too mental and my 9t is already a handful.

[BobbyVegas]

You can use an 13T EZRUN setup and that should be more than enough speed. I would not buy an expensive Brushless setup unless your going to race with a racing chassis that has better gearing options.

It does not take much to get the TT01 moving ;)

[Tuba]

I have a friend that run a strong BL motor with TT01 chassis.
He use a Novak Velociti 5.5R. But his TT01 has a lot of changes.

I make these videos from her car:

http://www.youtube.com/watch?v=1crMjZ8RDC0

http://www.youtube.com/watch?v=sMeIysNhGgY

I have one T05 IFS stock chassis with a Ezrun 13T (3000Kv) combo. Its run really fine!

Best Regards,

Tuba