mo5 drive shaft

[talltree]

Having problems with mo5 drive shaft part ba29 poping out of wheel axle part ba26 when
Under hard steering. I have made adjustments but none seem to help
I have set my radio to limit the steering which has decreased the turning radius and it still pops out. Any help would be great.

[OldSchoolRC]

I've had this issue a few times with various cars. Assuming that when the car is sitting at ride height and the wheels are straight ahead, the shaft can move back and forth a bit in the outdrives?

If you have some extra O rings (black ones) from Tamiya kits, put 1 in transmission outdrive to start, and another in the axle cup if needed. The goal is to keep the shaft centered laterally within the drive cups at all angles and eliminate the lateral play of the dogbone. May need to play around a bit with O rings to get it to sit in there perfectly.

OR, if you do not have O rings, use some old fuel tubing cut to size - fits perfect.